Applications

Normally used in laboratory of microbiology, molecular biology and, furthermore, used in innovative fields of scientific research and above all in the manipulation of:

·         Quality Control in pharmaceutical and food industries

·         Micro mechanical assembly

·         DNA/RNA amplification and thermo-cycling

 

Technical specification

Back panel and working tray in stainless steel AISI 304L “2B” finishing, perforated.

Front window and side walls in toughened glass.

Lighting on working surface by means of 1 fluorescent lamps of 15W

Construction structure in steel epoxy-polyester powder coated, resistant to the most common industrial disinfectants.

Ventilation system by means of n°1 motor blower dedicated to the one-way airflow in the working chamber, equal to 95% of the total involved air and to exhaust the remaining 5%.

The motor blower is centrifugal type, direct driven motor with double aspiration and protection factor IP22.

Air filtration by means of HEPA “H14 type” filter (refer to DIN 24184 and BS 3928) with efficiency of 99,999% at 0,3 micron particles size with DOP/DOS test (as defined to EN1822).

Command and Controls

Air ventilation control by means of manual electronic regulation of the revolution velocity of the motor blower.

Optional features

· Steel support stand epoxy polyester coated with wheels.

· Electrical power socket 4A (left internal side).

· 15W germicidal lamp, wavelength 253.7 nm (UV-C) with s/s shield.

· Exhaust HEPA filter.

· Drain tray in s/s AISI 304.

· Closing plate.

· Compressed air line with manual tap.

· Nitrogen line with manual tap.

· Vacuum line with manual tap.