Drop Weight Testers for Tests on Plastics Up to 650 Amsler HIT230F CAI, HIT 230 F, HIT 600F

Ask for quote

0.00 RON (VAT included)
Drop Weight Testers for Tests on Plastics Up to 650 J Amsler HIT230F CAI, HIT 230 F, HIT 600F
SKU: 1044081 Categories: , , ,
Ask for advice from a consultant: +40 21 25 53 132
Ask for quote
Please fill out the following form. Attention! Fields marked with * are required!

    Drop Weight Testers for Tests on Plastics Up to 650 Amsler HIT230F CAI, HIT 230 F, HIT 600F

     Drop Weight Testers for Tests on Plastics Up to 650 

    Industries

    • Plastics – materials testing
    Max. energy

    • 650 joules
    Type of test

    • Puncture
    • Charpy
    • Izod
    • Impact tensile

    Developed in close collaboration with our customers

    ZwickRoell has been delivering quality impact testing systems for years. Based on this experience, ZwickRoell has developed a new drop weight tester product series under the name Amsler.

    Plastics become brittle under load at high speeds and low temperatures. Therefore, the temperature response of plastics and their strength dependence on loading rate are investigated.

    The Amsler HIT230F and HIT600F drop weight testers, specifically designed for impact tests on plastics, feature excellent test area accessibility allowing for easy insertion of temperature-conditioned specimens, ultimately ensuring a high efficiency rate.

    • Amsler HIT600F: The universal drop weight tester for materials testing
    • Amsler HIT230F and Amsler HIT230F CAI: The small drop weight tester for puncture tests.

    Amsler HIT600F Range of Applications

    • Puncture test on plastics to ISO 6603-2 and ASTM D3763
    • Accelerated puncture test on plastics in accordance with various automotive standards
    • Puncture test on films to ISO 7765-2
    • Pre-damaging of fiber-reinforced composites (CAI) to ASTM D7136, DIN EN 6038 and AITM 1.0010, Boeing BSS 7260, SACMA SRM 2R-94, DIN 65561
    • Charpy and Izod impact tests to ISO 179-2, ASTM D6110 and in accordance with ISO 180 and ASTM D256

    Amsler HIT230F Range of Applications

    The Amsler HIT230F is ideally equipped for multiaxial impact puncture tests on plastics. The range of application includes material characterization using standard specimens in accordance with established research and development and quality assurance standards.

    • Multiaxial puncture test to ISO 6603-2, ASTM D3763, at ambient temperature and in extended temperature range

    HIT230F CAI Range of Applications

    The Amsler HIT230F is ideal for pre-damaging composites plates for the CAI (compression after impact) test used widely in the aerospace industry.

    • Pre-damaging of fiber-reinforced composites test plates for the compression after impact (CAI) test to Airbus AITM 1-0010, Boeing 7260, ISO 18352, DIN 65561, ASTM D7136, DIN EN 6038

    Reliable test results

    Reliable test results

    • High natural frequency allows for accurate test results.
    • High data acquisition rate of 4MHz for all measurement channels ensures measuring graphs at the best resolution.
    • Large transient memory enables measurement values to be saved in full resolution for brittle and ductile materials.

    Ergonomics & efficiency

    Ergonomics & efficiency

    • Excellent test area accessibility, enabling rapid completion of test series.
    • Easy, manual feeding of cooled specimens without installation of a temperature chamber.
    • No need to manually open safety devices in the test area.
    • Automatic series mode in testXpert III allows for series testing without operator interaction between individual specimens.
    • Automatic lubrication of the impactor.

    Testing of temperature-conditioned specimens

    At low temperatures impact strength is a critical characteristic value of the material used. For cooling of the specimens, ZwickRoell offers a temperature conditioning box for the Amsler HIT230F and Amsler HIT600F.

    For testing at low temperatures the specimens are first conditioned in this temperature conditioning box.

    The specimens are then placed one after the other directly from the temperature conditioning box into the drop weight tester and tested within a time period of 5 sec. (per specimen).

    This method is significantly faster when compared to the installation of a temperature chamber. The temperature conditioning box can also be easily moved and used to cool other specimens.

    Intuitive and workflow oriented touch operation

    Intuitive and workflow oriented touch operation

    • All test-related settings are grouped logically and are separated from higher-level system settings. The operator is guided through test configuration step by step.
    • Optimal coordination of testing and evaluations between drop weight tester and software.
    • Display of measuring graphs on the instrument to allow for direct and timesaving selection of the type of damage.

    echnical Overview

     
    Type Amsler HIT600F drop weight tester
    Item No. 1050436
    Potential energy, without acceleration unit, max. 550 J
    Potential energy, with acceleration unit, max. 670 J
    Dimensions
    Height 2987 mm
    Width, with operating unit and single mass holder 1370 mm
    Overall width, safety door open 2120 mm
    Depth 800 mm
    Drop height, dependent upon the testing equipment, max. 1400 mm
    Drop height, dependent upon the testing equipment, min. 50 mm
    Drop weight, max. 40 kg
    Drop weight, min. 2.04 kg
    Impact velocity, dependent upon the testing equipment, max. 5 m/s at 1.4 m drop height
    Impact velocity, dependent upon the testing equipment, min. 1 m/s
    Force signal resolution 16 bit
    Measured-value rate (force signal), max. 4 MHz
    Weight, with typical accessories, approx. 1020 kg
    Dynamic additional load, max., without acceleration 22.9 kN
    Dynamic additional load, max., with acceleration 28 kN
    Floor loading 10.4 kN/m²
    Concentrated load of the leveling feet 40.5 N/cm²
    Power input specifications
    Power plug CEE 7 (ground contact)
    Power supply 230 V, 1Ph/N/PE
    Current consumption, max. 14.8 A
    Power consumption (full load), approx. 3.4 kVA
    Power frequency 50/60 Hz
    Compressed air
    Supply pressure 5.5 … 8 bar
    Operating pressure 5 … 8 bar
    Compressed air consumption (compressed air) per impact or test 2 l
    Required air-supply output-rate 600 l/min
    Compressed air connector plug DN 7
    Maintenance unit Mounted on instrument

    Technical Overview

     
    Type Amsler HIT230F drop weight tester
    Item No. 1044068
    Potential energy 230 J
    Dimensions
    Height 2600 mm
    Width 1,000 mm
    Depth 600 mm
    Drop height, max. 1,000 mm
    Drop height, min. 110 mm
      23.3 kg
    Impact velocity, max. 4.4 m/s at 1 m drop height
    Force signal resolution 16 bits
    Measured-value rate (force signal), max. 4 MHz
    Gripping force 6 … 9 kN
    Weight, approx. 400 kg
    Floor load (applied via the load frame surface) 20 kN/m²
    Concentrated load of the leveling feet 200 N/cm²
    Average noise level of drive at vmax measured at 1 m distance from the front of the machine 60 dB(A)
    Power input specifications
    Power supply 100 … 240 V
    Phases 1Ph/N/E
    Permissible voltage fluctuation ± 10 %
    Power consumption (full load), approx. 0.5 kVA
    Power frequency 50/60 Hz
    Compressed air
    Supply pressure 5.5 … 8 bar
    Operating pressure 5 … 8 bar
    Compressed air consumption (compressed air) per impact or test 2 l
    Required air-supply output-rate 600 l/min
    Compressed air connector plug DN 7
    Maintenance unit

    Mounted on instrument

    Technical Overview

     

    Technical data for basic instrument

    Type Amsler HIT230F drop weight tester  
    Item No. 1044081  
    Potential energy 100 J
    Dimensions    
    Height 2600 mm
    Width 1000 mm
    Width with single mass holder 1235 mm
    Depth 695 mm
    Drop height, max. 1000 mm
    Drop height, min. 110 mm
    Drop weight, max. 10.2 kg
    Drop weight, min. 2.04 kg
    Impact velocity, max. 4.4 m/s at 1 m drop height
    Force signal resolution 16 bit
    Measured-value rate (force signal), max. 4 MHz
    Gripping force Manual  
    Weight, approx. 400 kg
    Floor loading 20 kN/m²
    Concentrated load of the leveling feet 200 N/cm²
    Average noise level of the drive at vmax measured in 1 m distance to the front of the machine 60 dB(A)
    Power input specifications
    Power supply 100 … 240 V
    Phases 1Ph/N/E  
    Permissible voltage fluctuation ± 10 %
    Power consumption (full load), approx. 0.5 kVA
    Power frequency 50/60 Hz
    Compressed air
    Supply pressure 5.5 … 8 bar
    Operating pressure 5 … 8 bar
    Compressed air consumption (compressed air) per impact or test 2 l
    Required air-supply output-rate 600 l/min
    Compressed air connector plug DN 7  
    Maintenance unit Mounted on instrument  

    Reviews

    There are no reviews yet.

    Be the first to review “Drop Weight Testers for Tests on Plastics Up to 650 Amsler HIT230F CAI, HIT 230 F, HIT 600F”

    Your email address will not be published. Required fields are marked *

    Related products

    Înapoi în sartorom-consumabile.ro
    Shopping Cart
    Da-ți click în afară pentru a ascunde bara de comparare.
    Compare
    Scroll to Top
    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.